Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Allen Homeowners
A fence in Allen has to do three jobs at once: keep kids and pets in, keep the view of your neighbor’s patio out, and hold its color and straight lines through North Texas heat, clay soil, and the occasional spring wind. When a fence starts to lean, rot at the base, or sag between posts, the whole yard looks tired. Our technicians have up to 13 years of experience setting posts, hanging gates, and choosing the right material for the lot. A strong local reputation, licensed and insured pros, and free estimates: that’s the standard we hold on every fence job in Allen.

Call (844) 320-7445 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fence Installation Service Includes
Fence work isn’t one job. A wood privacy run along a side yard, a low aluminum fence around a pool, and a commercial chain link enclosure at the back of a parking lot share almost nothing except posts in the ground. Here’s what each type involves and when it’s the right call for your Allen property.
Wood Fence
Wood remains the standard for privacy in Allen backyards, and cedar or treated pine are the usual picks. You need wood when you want full screening, a natural look against the yard, and a fence you can stain or paint to match the house. We build wood fences with posts set below the clay layer and in concrete, stringers spaced to prevent sag, and boards fastened with the correct ring-shank nails so they don’t back out in the heat.
Chain Link Fence
Chain link is the practical choice for a back property line, a dog run, or a commercial lot that needs a clear boundary without blocking the view. You’ll want it when privacy isn’t the goal and durability against wind matters more than appearance. We install galvanized and vinyl-coated chain link through Master Halco, set terminal posts and corners properly, and stretch the fabric tight so it doesn’t sag after the first summer.
Vinyl Fence
Vinyl fencing holds its color without paint or stain, which makes it popular for homeowners who want a clean look with almost no maintenance. It’s a good fit when you’re fencing a pool area, a front-yard accent, or a long run where repainting every few years isn’t realistic. We install vinyl through Barrette and Bufftech, with reinforced rails and posts set true so panels stay aligned through the season.
Aluminum Fence
Aluminum fencing gives you the look of wrought iron at a lighter weight, with a powder coat that resists rust and chipping. It’s the right pick when you want a visible boundary that doesn’t block sight lines, like around a pool or along a front walk. We install ornamental aluminum through Ameristar and Jerith, with welded or racked panels to follow grade and gates that swing clean without dragging.
Iron Fence
Ornamental iron is the heaviest, most permanent option for homeowners who want a security boundary that looks the part. You’ll want iron when the fence is part of the front elevation or when the property needs a real barrier, not just a marker. We set iron panels in concrete footings, space pickets to code for the application, and hang gates on heavy-duty hinges built to carry the weight.
Fence Repair
Not every fence needs to come out. A leaning section, a broken picket, a sagging gate, or rot at the base of a few posts can often be repaired rather than replaced. We inspect the posts and stringers, replace the damaged sections, and reset posts where the footing has failed. If a repair would cost close to a new fence, we tell you that up front instead of selling you the smaller job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Material choice matters more than most homeowners expect. A vinyl panel from one manufacturer can look identical to another on the showroom floor and behave very differently after three summers in Allen heat. That’s why we install from a real portfolio instead of whatever a single supplier happens to carry. Barrette vinyl systems give you clean profiles and reinforced rails that hold alignment well; Master Halco chain link is the workhorse for property lines and commercial runs where the fabric has to stay tight. Ameristar ornamental aluminum and Jerith gates round out the metal options, and both hold up well when the gate hardware is matched to panel weight.
Working with multiple manufacturers means we can match the material to the job instead of the other way around. If you’ve already settled on a brand, we’ll work with it. If you haven’t, we can walk you through the trade-offs between them on site. Whether you have Barrette, Master Halco, Ameristar, Jerith, or any other make, the goal is the same: a fence that’s straight, tight, and built to stay that way. Choose your materials, we handle the rest.

Signs You Need Fence Installation Right Now
- Posts leaning or pulling out of the ground. North Texas clay shrinks and swells with the seasons, and a post set too shallow will start to walk. Once two or three posts lean the same direction, the stringers are carrying load they weren’t built for and the whole run is at risk.
- Soft wood at the base of posts or rails. Rot starts where moisture collects, usually right at grade. Press a screwdriver into the post base; if it sinks easily, that post is past saving and needs to be replaced, not patched.
- Gaps between boards or a sagging top rail. Boards that have shrunk or warped leave sight-line gaps, and a sagging rail means the stringer is failing. Both get worse through the season and are cheaper to fix before the fence panel drops.
- A gate that drags, sticks, or won’t latch. Gate problems usually trace back to a hinge pulled loose from the post or a post that’s shifted. A gate that won’t latch is a security issue, especially with kids or pets in the yard.
- Rust bleeding through on metal or a chalky film on vinyl. Heavy rust on chain link or iron means the coating has failed, and chalky vinyl is sun damage. Neither is dangerous yet, but both signal the material is near the end of its service life.
Our Fence Installation Process – Step by Step
- 1
On-site walk and measurement. We measure the run, check grade changes, and locate the property line so the fence sits where it should. If a survey is needed, we’ll tell you before any digging starts.
- 2
Material selection and written estimate. You pick the material and profile from real options, not a single catalog. We put the line-item estimate in writing, and that estimate sets the final price.
- 3
Calling for utility locates and permits. Before a shovel hits the ground, utilities get marked and any required permits get pulled. Most Allen fence projects are straightforward on this front, but we confirm rather than assume.
- 4
Post setting and panel installation. Posts go in at the right depth with proper footings, then stringers, panels, and gates go on with hardware sized for the load. We check plumb and grade along the way, not just at the end.
- 5
Final walkthrough. We walk the fence line with you, check every gate swing and latch, and clean up the site. Anything that needs adjusting gets handled before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Allen?
Typical estimated fence installation in Allen runs $3,500 – $9,000 for a vinyl fence, and $4,000 – $10,000 for an aluminum fence. Those ranges cover most residential lots; the final number depends on linear footage, material choice, gate count, and how much site work the run needs. A short side-yard privacy run sits at the low end, while a full perimeter with two or three gates pushes toward the top. The written estimate sets the final price, and there are no change orders once the work starts.
What moves the number: the material itself, the number of gates and their hardware, whether old fencing needs removal, and terrain. A flat lot costs less than one with a slope that needs racked panels. Steps and corners add labor. To avoid overpaying, ask for a line-item estimate, confirm the footage being quoted, and make sure removal and haul-away are included rather than added later. Our free estimate covers all of that and includes a written scope, so you compare like for like.
Fence Installation Near Allen – Our Service Area
We work fence projects across Allen and the surrounding communities, including Plano, Frisco, Richardson, Prosper, The Colony, Little Elm, Carrollton, Celina, Addison, Farmers Branch, and Paloma Creek South. If you’re comparing options across the area, see our fence installation work in Plano or fence installation in Frisco. Scheduling usually depends on material lead times and permit turnaround. Call (844) 320-7445 and we’ll give you a realistic timeline for your Allen address.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Allen
Fence installation is the process of setting posts, hanging panels, and fitting gates to create a boundary around your property. It covers everything from marking the line and calling for utility locates to setting footings, framing the run, and installing hardware. For most Allen homeowners, it’s a one-to-three-day project once materials arrive. Call (844) 320-7445 to schedule a free estimate.
Most residential fence projects in Allen run one to three days of on-site work, depending on footage and material. A simple privacy run goes faster than a full perimeter with multiple gates or a mixed-material install. Material lead times and any permit requirements can add time before the crew starts. We give you a realistic window in the written estimate.
Typical estimates are $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum in Allen. Wood, chain link, and iron land in their own ranges depending on the material and footage. The written line-item estimate sets the final price. Call (844) 320-7445 for an exact quote; estimates are free.
Yes. We install Barrette and Bufftech vinyl, Master Halco chain link, and Ameristar and Jerith ornamental metal. If you’ve already picked a brand or have a material spec from an HOA, bring it to the estimate and we’ll work from it. If you’re still deciding, we’ll walk you through the trade-offs on site.
Same-day repair visits are often possible depending on the schedule. Installation itself is a planned project and gets scheduled after the estimate. Call (844) 320-7445 for same-day availability. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Workmanship warranty terms are confirmed in your written estimate, and manufacturer warranties come from the brand of material you choose. Barrette, Master Halco, Ameristar, and Jerith each publish their own coverage for their products. We walk through both the workmanship and the material warranty with you before you sign.
Clear the fence line of furniture, planters, and anything breakable, and unlock any gate the crew needs to access. Move pets indoors for the day and let neighbors know the line will be marked. If a survey is needed, have it on hand before the walk-through. We confirm utility locates before any digging starts.
Schedule Your Fence Installation Service in Allen Today
Whether you’re replacing a leaning wood fence, fencing a new pool, or enclosing a commercial lot, we’ll walk the property, show you real material options, and put the price in writing before anything is ordered. Call (844) 320-7445 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every phase – from the fence line to the ridge line.
Written by the team at Whitman Contractors.