Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Frisco
Fence Installation in Frisco, TX is a job shaped by two forces locals know well: soil that moves and subdivisions that were platted in phases. If your fence is leaning, sagging at the gate, or washing out against a neighbor’s lot, we can help. We work across Frisco’s master-planned communities and the older core near Main Street, read the grade before we set a post, and put the plan in writing before anything gets dug. Call (844) 320-7445. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Frisco Homeowners Call Whitman Contractors for Fence Installation
We’re a full-scope general contractor, which matters more on a fence than people expect. A fence line touches grading, drainage, and sometimes a new gate or hardscape edge, and we handle all of it in one place. Our technicians have up to 13 years of experience, and they understand why a Frisco fence fails: clay soil heaving a post, a swale dumping toward the lower lot, or an HOA standard that wasn’t checked before the panels went up.
Frisco customers call us because we start with an inspection and a written plan, not a sales pitch. We tell you what’s actually under the ground and what the install has to account for. And because we work from a broad material portfolio, your design isn’t limited to whatever a single supplier stocks: your spec, not ours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Frisco
Wood Fence Installation in Frisco
Wood fencing is still the most requested privacy option in Frisco, and for good reason: it fits the brick-and-masonry look of most post-1990 homes and gives real screening between close-set lots. In Frisco’s blackland-clay soil, the difference between a fence that lasts and one that leans within a few seasons is post depth and clean concrete set below the active clay layer. That’s where we start.

Privacy Fence Installation in Frisco
A privacy fence in a Frisco subdivision faces a specific test: neighboring homes sit close, and lot grades often don’t match. When a fence line crosses a phase boundary, one side can be waterlogged while the other runs dry. We set the run to the grade and drainage swale rather than pulling a straight string to the property line, so the fence stays plumb and water still moves where the developer intended.

Vinyl Fence Installation in Frisco
Vinyl holds up well in the North Texas heat and needs no staining or sealing, which suits Frisco’s newer master-planned neighborhoods where clean lines and consistent color matter to HOA design standards. We’ll confirm the approved height, style, and color with you before install so there’s no tear-out after the fact.

Aluminum and Fence Gates in Frisco
Aluminum fencing works well around pools, side yards, and driveway gates where you want a boundary without blocking sightlines. Gates get used more than any other part of a fence, so we set posts for the hinge and latch load and check swing clearance over the finished grade. If your lot slopes at the gate, the gate gets built to that slope.
Trusted Brands We Service in Frisco
We work with fence materials from Master Halco, Barrette, and Ameristar, so you choose from real options across wood, vinyl, aluminum, and ornamental styles rather than a single supplier’s catalog. We don’t stock parts on a truck or warehouse them locally; materials are specified for your job and sourced to the written plan. That keeps turnarounds fast and lets you pick the product that matches your Frisco home and your HOA standards, not whatever happens to be on hand.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Frisco Homes
- Clay-soil heave pushing posts out of plumb. Frisco’s blackland clay expands and shrinks with the seasons, and posts set in shallow concrete get shoved upward within a few seasons. The fix isn’t a new panel; it’s resetting posts below the active zone with clean concrete.
- Fence lines crossing a phase-boundary drainage swale. When one subdivision phase sits higher than the next, a fence pulled straight to the property line can trap water against the lower lot. That rots pickets and undermines footings, and it’s a condition built-out neighbors like Plano simply don’t share.
- HOA design standards rejected after install. Frisco’s master-planned subdivisions like Frisco Lakes, Starwood, and Newman Village enforce height, material, and color rules. A run installed before approval can be torn out on the owner’s dime, so we plan around the standards first.
- Mismatched lot grades between adjacent phases. Because Frisco was platted in stages over decades, contractors routinely hit grade breaks and swales at a shared line. One side of the run stays wet while the other dries out, so posts fail unevenly and the line goes crooked.
Pricing for Fence Installation in Frisco, TX
Prices below are typical estimated ranges for Frisco, and the written estimate sets the final price. A vinyl fence installation in Frisco typically runs $3,500 – $9,000, and aluminum runs $4,000 – $10,000. The lead range for a full installation here is $3,500 – $9,000. Cost moves with linear footage, material, gate count, and how much post reset or regrading the grade break requires. We inspect first, write allowances into the contract, and price any surprise in writing before we touch it. Estimates are free.
| Service | Typical Estimated Range in Frisco |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We Also Serve Cities Near Frisco
We work in Frisco and the surrounding communities, including Prosper, The Colony, Little Elm, and Paloma Creek South. If your project spans a fence line and a paver edge, or you’re adding a gate as part of a larger upgrade, our fence installation team and our hardscape work coordinate under one contractor. Call for a free estimate and we’ll walk the line with you.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Frisco
Most Frisco fences lean because posts were set too shallow in the blackland clay, which expands and shrinks seasonally and heaves them out of plumb. Where adjacent build phases have mismatched lot grades, one side stays waterlogged and the other dries, so posts fail unevenly. The fix is pulling the failing panels, resetting posts at proper depth in clean concrete, and regrading the run where a swale is involved. Call (844) 320-7445 for an exact quote; estimates are free.
Yes. When a fence line crosses a phase boundary, the developer’s drainage swale often dumps toward the lower lot, so the fence must be built and set plumb to the swale, not just pulled to the property line. Building blind to that grade can trap water at the lower neighbor’s boundary and undermine footings. We read the grade first and plan the run so water still moves where it was designed to go. Call (844) 320-7445 to schedule a free estimate.
In most cases, yes. Frisco’s master-planned subdivisions like Frisco Lakes, Starwood, and Newman Village enforce design standards on height, material, and color, and a run installed before approval can be torn out at the owner’s cost. We confirm the standards with you before anything is dug so the install matches the design. Call (844) 320-7445 and we’ll get the plan on paper first.
Sometimes, and that’s exactly why we inspect before quoting. Pulling an old fence can reveal shallow posts, soft spots from a trapped swale, or a grade that no longer drains the way it should. We write allowances into the contract and price any surprise in writing for your approval before we touch it. Call (844) 320-7445 for an exact quote; estimates are free.
Frisco’s construction is dominated by simultaneous greenfield development and rapid infill, so fencing often has to fit around active builds next door. Because the work usually begins with an inspection and a written plan, we can sequence your install around what’s happening on adjacent lots and the HOA’s standards. That coordination is a normal part of the job here, not an extra. Call (844) 320-7445 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Frisco’s phased plats and moving clay soil make a fence a grading job as much as a building job, and that’s the part most quotes miss. We inspect first, put the plan and allowances in writing, and price any surprise before we start. Call (844) 320-7445 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Whitman Contractors.