Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Allen Homeowners
North Texas sun is unforgiving on glass, and the sealing and glazing that held up when your home was built won’t last forever. Fogging panes, drafts along the frame, and doors that stick in the summer heat are the usual warnings that your windows and doors need attention. Our technicians have up to 13 years of experience fitting and replacing windows and doors across Allen, and they bring real material choices from brands like PGT, CGI, and Therma-Tru rather than whatever one supplier happens to carry. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 320-7445 to schedule a free estimate.

Key Takeaways
- Typical window replacement in Allen runs $4,500 – $15,000; impact window installation typically runs $8,000 – $25,000.
- We install and replace windows, doors, sliding and patio doors, and impact-rated glass from PGT, CGI, ViewLux, and Therma-Tru.
- Every quote is a free written line-item estimate, and the written estimate sets the final price.
- We are a full-scope contractor: windows and doors sit alongside roofing, kitchens, baths, additions, fencing, and hardscape under one point of contact.
What Our Windows & Doors Service Includes
We treat windows and doors as part of the home’s exterior envelope, not as a standalone swap. That means we look at how each opening meets the wall, how the frame sheds water, and whether the glass performs against a Collin County summer.
Window Installation
Window installation is fitting new windows into a new or existing opening, whether that’s a single room or a whole home. You need it when you’re building an addition, replacing aging units, or upgrading glass for comfort and efficiency. We measure each opening, work with brands like PGT and ViewLux, and handle the finished installation so the frame, flashing, and interior trim line up as one job. If your project also touches the roofline, our roofing category covers that side of the envelope.
Door Installation
Door installation covers entry doors, patio doors, and interior doors that need to be set true and sealed tight. You need it when a door has warped, won’t latch, or the existing slab has seen one too many seasons. We work with Therma-Tru and other door lines, fit the frame and hardware, and make sure the door swings clean and closes without a draft.
Window Replacement
Window replacement is swapping out existing units for new glass and frames without changing the opening’s footprint. You need it when panes fog between the layers, seals fail, or the frames have cracked and warped. We pull the old units, check the opening for water intrusion, and set the new windows with fresh sealing so the fix holds.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames built to hold up against wind-borne debris. You need them when you want a stronger barrier during storm season and quieter rooms the rest of the year. We source impact-rated lines, including PGT and CGI, and install them to spec so the opening performs as designed.
Energy-Efficient Windows
Energy-efficient windows are built with better glazing and frame construction to reduce heat transfer and UV damage. You need them when your cooling bills creep up, rooms near the glass run hot in the afternoon, or the furniture and flooring near windows are fading. We help you pick the right glass package for the exposure rather than selling one spec to every home.
Sliding & Patio Doors
Sliding and patio doors are the large glass openings that connect your home to a backyard or patio. You need them when the track has worn, the rail sticks, or the seals have failed and stop holding. We fit new sliders and patio doors, including impact sliding glass doors, and check the track and threshold so the door glides and seals without a leak.
Impact Garage Doors
Impact garage doors use reinforced panels and heavier hardware to face the same wind and debris as your windows. You need them when the door is on an exposed wall or you’re upgrading the whole garage opening. We coordinate the door with the rest of the envelope, so the garage faces the street as one finished surface.
Custom & Geometric Windows
Custom and geometric windows are shaped or arched units that don’t come off a standard shelf, such as round, half-round, or trapezoid shapes. You need them when an addition, stairway, or feature wall calls for glass shaped to the opening. We take the measurements, work with the manufacturer on the unit, and install it so the trim and frame read clean from both sides.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with PGT windows and know where their frames and hardware tend to wear first. Their impact-rated lines hold up well in Texas weather, but the seals and gaskets are the first parts to check when a unit stops performing. We also handle CGI products, which are built around impact glazing and reinforced frames, and we understand how those units need to be set so the opening seals correctly. ViewLux gives us a strong option for energy-efficient units, where the glass package matters as much as the frame. And we install Therma-Tru entry and patio doors, so we know their hinge and threshold details and how to fit them so the door closes without a draft.
We’re not a dealer, and we’re not tied to one manufacturer. That’s the point: you choose the brand and spec, and we handle the install. Whether you have PGT, CGI, ViewLux, Therma-Tru, or any other make, we can help. If your project extends to a kitchen or bath remodel, the same team carries the material choices through with cabinetry and fixtures from other categories. Browse the range of work through Whitman Contractors to see how the categories fit together.

Signs You Need Windows & Doors Right Now
- Condensation or fog between the panes. Fog trapped inside a double-pane window means the seal has failed and the insulation is gone. That unit is no longer doing its job, and replacement becomes the practical fix.
- Drafts or rattling frames. Feeling air move around a closed window or hearing the frame rattle on a windy day points to worn weatherstripping or a frame that’s pulled away. Left alone, that gap lets water in behind the wall.
- Doors that stick, drag, or won’t latch. A door that caught fine last year and won’t close now is telling you the frame or hardware has shifted. Fixing it early keeps the opening sealed and stops bigger structural issues.
- Rising cooling bills with no other cause. If the AC is running fine but the bills keep climbing, the glass is a common culprit. Old single-pane or failing units let heat in and push the system harder.
- Faded flooring or furniture near the windows. UV damage shows up as bleached wood, faded fabric, or curling vinyl. Modern glass coatings cut that exposure, so replacement protects the furnishings as well as the room.
Our Windows & Doors Process – Step by Step
- 1
Free in-home estimate. We walk the openings with you, take measurements, and talk through what you want to change and what can stay. You get a written line-item quote, so you know exactly what’s covered before you commit to anything.
- 2
Material and spec selection. You choose the glass, frame, and hardware from real options, including PGT, CGI, ViewLux, and Therma-Tru. We explain the trade-offs on efficiency, impact rating, and finish so you can pick what fits the exposure and the budget.
- 3
Ordering and scheduling. Once the spec is set, we order the units and confirm the install window with you. If your project includes several phases, like an addition plus new windows, we sequence them so the trades don’t get in each other’s way.
- 4
Installation and sealing. Our technicians remove the old units, check the opening for water damage or rot, and set the new windows and doors with fresh flashing and sealing. We test every door and window to confirm it opens, closes, and latches correctly before we call it done.
- 5
Final walkthrough. We go through the finished work with you, confirm the doors and windows operate as they should, and leave you with the paperwork. Any permit or inspection requirement is handled before the job closes out.
If your project touches more than the openings, we can fold the work into one scope. Our windows and doors category connects with bathroom remodeling and kitchen remodeling when a renovation spans multiple rooms, so you deal with one contractor across the whole job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Allen?
Window replacement in Allen typically runs $4,500 – $15,000 depending on how many units you’re replacing and the glass and frame you choose. Impact window installation typically runs $8,000 – $25,000, because impact-rated units cost more and take more careful setting. Door installs and sliding patio doors are priced by the opening and the spec, and those estimates are folded into your written quote.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
Several things move the number: the number and size of openings, whether you choose standard or impact glass, the frame material, and whether the opening needs structural repair once the old unit comes out. Custom and geometric shapes cost more than standard sizes. You avoid overpaying by getting a written line-item quote that spells out units, labor, and any repair work, rather than a lump-sum figure you can’t check. Our free estimate includes the measurements, the glass and frame options, and a clear price. The written estimate sets the final price, and we don’t add change orders once the work starts.
Windows & Doors Near Allen – Our Service Area
We serve Allen and the surrounding Collin and Dallas County communities, including Plano, Frisco, McKinney, Richardson, Prosper, The Colony, Little Elm, Celina, Carrollton, and Farmers Branch. Response times vary by job, but we schedule promptly and confirm your window before we come out. If you’re nearby and want to compare options, our Plano and Frisco pages cover local details. Call (844) 320-7445 to get an estimate on the calendar.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Allen
It covers the installation, replacement, and upgrade of windows and doors across your home, including entry doors, sliding and patio doors, and impact-rated glass. It can also include custom shapes and impact garage doors when those openings are part of the job. We measure each opening, help you pick the material, and install and seal the units so they perform. Call (844) 320-7445 for an exact quote – estimates are free.
Most window replacement jobs take one to three days, depending on how many units and whether the openings need repair. Impact installation and custom or geometric windows take longer because the units are more involved to set and seal. We confirm the schedule with you before the job starts. Call (844) 320-7445 to talk through your timeline.
Window replacement typically runs $4,500 – $15,000, and impact window installation typically runs $8,000 – $25,000. Your number depends on the unit count, the glass and frame spec, and any repair work behind the old units. The written estimate sets the final price, so you won’t see a surprise change order. Call (844) 320-7445 for an exact quote – estimates are free.
Yes. We install and replace PGT, CGI, ViewLux, and Therma-Tru windows and doors, and we know how those lines fit and seal. Whether you already have one of those brands or a different make, we can help you match, replace, or upgrade. Call (844) 320-7445 with the brand and model and we’ll talk through the options.
We can handle same-day service when the schedule allows and the work is a straightforward repair. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening. Call (844) 320-7445 to check availability.
Our window and door work comes with a workmanship warranty, and the manufacturer covers the units themselves under its own terms. The written estimate spells out what each warranty covers so you know what to expect. We walk you through the details at the final walkthrough. Call (844) 320-7445 with questions about coverage.
Clear the area around each opening so the technicians can work without moving furniture, and take down curtains, blinds, and wall decor near the windows. If you have pets, keep them in a closed room away from the work. We’ll confirm the details when we schedule your free estimate. Call (844) 320-7445 to get started.
Schedule Your Windows & Doors Service in Allen Today
Whether you need one fogged window replaced or a full set of impact windows and doors installed, we make the process clear from the first measurement to the final walkthrough. The estimate is free, the quote is written line by line, and the written estimate sets the final price. Call (844) 320-7445. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Whitman Contractors.