Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Frisco
Kitchen remodeling in Frisco, TX typically runs $14,000 – $45,000 for a full remodel, with smaller partial updates landing between $9,000 and $20,000. That range covers design, demolition, cabinetry, counters, tile and the inspection work behind the walls. We know Frisco, and that matters here more than most places, because a kitchen in Starwood and a kitchen off Main Street can sit under two different sets of HOA design standards and two different construction realities. Call (844) 320-7445 to set up your free estimate.
Why Frisco Homeowners Call Whitman Contractors for Kitchen Remodeling
Whitman Contractors is a full-scope general contractor, which means a Frisco kitchen remodel doesn’t require you to line up a cabinet installer, a countertop fabricator, a tile setter and an electrician and hope they talk to each other. One contractor, every phase. Our technicians have up to 13 years of experience, and we carry the structural, mechanical and finish work under a single written scope.
Frisco’s building landscape is unusual. It’s one of the fastest-growing large cities in the country, so work here is split between greenfield subdivisions still being platted and rapid infill in the original 1990s-2000s core around Main Street and the old downtown rail corridor. That means we plan around active new-builds on one street and foundation checks in an older home two blocks over.
We’re a whole-home contractor, not a kitchen-only shop. That matters in Frisco because a kitchen project often pulls in a window swap, a door replacement, or a roofing repair nobody budgeted for. We can fold those into the same scope rather than handing you off. The written estimate is free, and it’s line-item, so you see exactly what each phase costs before demolition starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kitchen Remodeling Services in Frisco
Full Kitchen Remodeling
A full Frisco kitchen remodel starts with load-bearing questions more often than people expect. In the post-1990 brick-veneer homes common across Frisco’s master-planned communities, the wall between the kitchen and a formal dining room is frequently the first thing a homeowner wants opened up, and that begins with a structural review and an engineered beam before any framing is touched. Because these are slab-on-grade homes on blackland-clay soils, we check the slab for level and flat before new cabinetry is set, and any wiring, gas or plumbing changes get a rough-in inspection before the walls close.
Kitchen Design & Layout
Layout decisions in Frisco kitchens run into HOA review whenever the plan touches something visible from outside, like a vent hood, a window or a door. We design the layout with that constraint in view from the start, so you’re not redesigning after a submittal comes back. Our in-house design step pairs with the kitchen remodeling team’s build schedule so the approved plan and the demolition date line up.
Quartz & Granite Countertops
Countertops in a Frisco kitchen typically run $2,000 – $6,500 depending on square footage, edge profile and material. We source from Cambria, Silestone and Caesarstone, so you’re choosing from real options rather than whatever one fabricator happens to stock. Templating waits until the cabinets are set and the slab is verified, which avoids the creep that comes from installing stone over an uneven run.
Cabinets & Countertops
Cabinet installation and refacing in Frisco runs $4,000 – $13,000, driven mostly by whether you’re refacing, refitting or replacing the full run. We work with KraftMaid and Wellborn, and we check the slab and the wall plane before anything is hung. In a subdivision where foundation movement is routine, that check is the difference between a cabinet that stays square and one that racks out of alignment within the first season.
Backsplash, Tile & Flooring
Backsplash work runs $800 – $2,500 and tile flooring is quoted alongside it. North Texas summers and the seasonal moisture swings that come with them move the slab in Frisco homes, so tile layout and crack isolation membranes get planned around that movement rather than ignored. A backsplash is a good spot to tie the cabinet and counter selection together, and we set the samples side by side before anything is ordered.
Small & Partial Kitchen Remodels
A partial remodel in Frisco runs $9,000 – $20,000 and often covers cabinet refacing, new counters and a backsplash without touching the layout. It’s a good fit for the older homes in the original Frisco core, where the goal is a modern finish without a full gut. We scope it honestly: if a partial remodel will fight the existing rough-in, we say so.
Trusted Brands We Service in Frisco
We source kitchen materials from a portfolio broad enough that you pick your spec, not ours. Cabinetry comes from KraftMaid and Wellborn, countertops from Cambria, Silestone and Caesarstone, and plumbing fixtures from Kohler, Grohe, Toto, Moen and Blanco, paired with Schluter tile systems for the wet zones. We don’t claim to stock parts locally or run a warehouse in Frisco. What we do is order, coordinate and install against the written scope, and we tell you lead times up front so the schedule holds. Material availability is one of the things we confirm before a demolition date is set.
Common Kitchen Remodeling Problems We See in Frisco Homes
- Incomplete HOA submittals. Packets go to the architectural review committee without elevations, finish samples or a clear scope, and they sit in cycle after cycle while the demolition date slips. We prepare and file the packet so it clears.
- Verbal load-bearing wall removal. The beam and posts were never engineered or permitted, and it surfaces at framing, forcing a change order and a stalled schedule. We engineer and permit the beam before demo.
- Cabinets set on an unverified slab. In a Frisco subdivision where foundation movement is routine, cabinets and islands installed without a level and flat check rack out of alignment within the first season.
- Mismatched phase grades and drainage. Frisco’s subdivisions were platted in phases over several decades, and adjacent phases sometimes meet at different lot grades. A drainage swale at a lot line is a common call, and it can affect how an exterior-visible kitchen change is sited.
Pricing for Kitchen Remodeling in Frisco, TX
Frisco pricing tracks the scope and the material tier. A full gut-and-rebuild runs higher than a partial refit, and cabinet and counter choices move the number as much as square footage does. These are typical estimated ranges, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Structural work, engineered beams, and rough-in inspections add to the base ranges when a wall is coming out. HOA review time affects the calendar more than the budget. The estimate is free and line-item, and there are no change orders added after the fact for work that was scoped. Call (844) 320-7445 to schedule yours.
See the difference
Before
After
Before
After
Before
AfterWhy Frisco’s Architectural Review Shapes a Kitchen Remodel
Frisco’s phased master-planned subdivisions each carry their own HOA design standards. Frisco Lakes, Starwood and Newman Village don’t answer to a single city-wide rule; each subdivision and often each phase has its own review committee and its own submittal format. So a kitchen remodel here can require architectural review approval for exterior-visible changes, like a window or door swap, a vent hood, a new exterior vent penetration, or anything that changes the front elevation’s appearance.
What typically gets approved is material and color continuity with the existing home: matching or closely compatible finishes, heights that don’t disturb the streetscape, and styles already represented in the phase. What stalls is a submittal with no elevations, no finish samples and no clear scope. We file the packet for you, and we front-load it with elevation drawings, product cut sheets, and material and color samples, so the committee has everything in one cycle instead of three.
Review timelines vary by subdivision and phase, so we don’t quote a single number. We build the review window into the project calendar and sequence the work around it: design and submittal first, ordering second, demolition third. That sequencing is what keeps a Frisco kitchen from sitting half-finished with the walls open while the build waits on a committee. We don’t start demo until the approval and the structural engineering are both in hand.
We Also Serve Cities Near Frisco
We work in Frisco and the communities around it, including Prosper, The Colony, Little Elm and Paloma Creek South. The phased-subdivision review dynamics differ from Frisco’s, and we plan each city’s projects against its own standards. If you’re nearby and planning a kitchen, the same free line-item estimate applies. Call (844) 320-7445, or start with our kitchen remodeling overview.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Kitchen Remodeling in Frisco
Yes, in most Frisco master-planned subdivisions, if the remodel changes anything visible from outside. That covers window and door swaps, vent hoods and any change to the front elevation. Interior-only work that isn’t visible from the street usually doesn’t need review. We confirm your phase’s requirements before the estimate is finalized, and we file the submittal for you. Call (844) 320-7445 for an exact quote, estimates are free.
We sequence the project so demolition doesn’t start until the HOA approval and the structural engineering are both in hand. Design, submittal and material ordering happen in a controlled order before demo, so the build doesn’t stall with the walls open. We build the review window into the calendar rather than discovering it mid-project. Call (844) 320-7445 to walk through your subdivision’s timeline.
Because Frisco’s slab-on-grade homes sit on blackland-clay soils that move with seasonal moisture, and cabinets set on an unverified slab rack out of square over time. The fix starts before installation: we check the slab for level and flat, and we don’t set cabinetry until it passes. Call (844) 320-7445 for an exact quote on a cabinet or island install.
Usually yes, but only with an engineered beam and the correct permits, and the structural review comes before any framing is touched. In Frisco’s brick-veneer homes, that wall is frequently the first thing a homeowner wants opened, so we engineer it early rather than discovering it at framing. Call (844) 320-7445 to price a structural scope, estimates are free.
It should spell out the structural and permit scope, the line-item material list, the HOA submittal responsibility, and the payment schedule tied to milestones. It should also name who files the architectural review packet, which here is us. Get it in writing and read the change-order terms. Call (844) 320-7445 to see a line-item estimate for your kitchen.
Schedule Your Free Frisco Kitchen Remodeling Estimate
Whether you’re opening a dining-room wall in an older home near Main Street or updating cabinets and quartz in a newer phase out by Frisco Lakes, we can put a line-item estimate in front of you and sequence the build around your subdivision’s review calendar. Licensed & insured, with written estimates and the permits pulled for you. Call (844) 320-7445. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Whitman Contractors.