Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Allen Homeowners Choose PGT Construction
We provide independent PGT construction service in Allen for homeowners whose impact windows, sliding screen doors, and aluminum units need repair or replacement. What sets our PGT work apart is diagnostic depth: we test the seal, the glazing gasket, and the frames before we recommend anything, so you know whether a unit needs a new insulated glass unit or a full replacement. Allen’s hail belt and hot summers are hard on these assemblies, and we’ve learned to read the damage they leave behind.
To be clear: we are an independent PGT service provider. Whitman Contractors is not affiliated with, authorized by, sponsored by, or endorsed by PGT. We’re an independent contractor that installs, repairs, and services PGT products with quality parts that fit them.
If a PGT unit in your home is fogging, leaking, or binding, call (844) 320-7445 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Whitman Contractors for Your PGT Construction?
Our technicians have up to 13 years of experience, and a good share of that time has been spent working on PGT assemblies specifically. That matters because PGT products have their own habits. The hardware on a WinGuard unit doesn’t behave like the hardware on a builder-grade vinyl window, and the glazing system has to be re-set correctly or the impact rating is compromised.
We know the details that separate a correct repair from a call-back: how setting blocks sit under an impact-rated IGU, why aftermarket rollers tend to fail early inside an Eze Breeze track, and how sill pans on the aluminum series need to drain after heavy rain. Our approach to parts is straightforward. We source OEM PGT replacement glass, rollers, balances, and weather seals whenever the lead time allows, because fitting the right component the first time is cheaper than repeating the job.
We’re not a PGT dealer, and we don’t claim factory certification. What we offer is warranty-safe workmanship: we handle the assembly the way the manufacturer’s installation instructions call for, so your coverage isn’t put at risk by a shortcut. Every job comes with a written line-item quote and a written scope before work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Allen
Most of the PGT problems we see in Allen fall into five categories. Here’s what each one looks like and why it happens.
- Foggy or hazy WinGuard impact glass. A milky haze creeping in from a corner is the classic sign of a failed dual-seal insulated glass unit. Seal creep lets moisture in, the desiccant saturates, and the space between the panes clouds over. In North Texas, the constant thermal cycling from 100°F summers to mild winter swings pushes these units to fail somewhere in the 8 to 12 year range.
- Eze Breeze panels that bind or jump the track. Sliding screen panels that stick, jump, or drag usually have worn rollers or a track that’s collected grit. When the rollers flatten, the panel drops slightly and the seal at the sill opens up, which is how water starts getting in during a hard rain.
- Corroded weep-hole covers and sill pans. The aluminum series frames can pit and corrode at the weep holes and sill pans over time. Once the drainage path clogs or corrodes, water backs up and you get interior staining along the sill after heavy weather.
- Loose or cracked glazing beads and gaskets. The glazing beads and gaskets hold the glass in place and keep wind-driven rain out. When they shrink or crack, the impact rating is compromised and the weather seal is no longer doing its job. This one is easy to miss until a storm finds it.
- Rattling or drafty units after hail. Hail doesn’t always break glass. Sometimes it loosens the assembly just enough to create a rattle in gusty wind and a faint draft at the frame. That’s a sign the unit needs to be pulled and re-set with new setting blocks and impact-rated gaskets.
Here’s how this typically goes. A homeowner notices a milky haze creeping in from the corner of a PGT WinGuard impact window and a faint rattle when the wind gusts. The usual cause is a breached dual-seal insulated glass unit, often accompanied by a shrunken glazing gasket. A qualified local pro confirms the seal failure with a moisture meter, orders an OEM-matched IGU or full sash, and re-sets the unit with new setting blocks and impact-rated gaskets so the assembly keeps its rating.
PGT Parts & Our Repair-vs-Replace Approach
Parts choice drives how long a repair lasts. We source OEM PGT replacement glass, rollers, balances, and weather seals whenever the lead time allows. Aftermarket rollers and gaskets are the usual culprits behind repeat failures in impact-rated assemblies, because they don’t hold up to the same load and weather the OEM components were built for.
The repair-or-replace call comes down to how much of the assembly has failed. One failed seal on an otherwise sound frame is usually a repair. Multiple failed seals, corroded frames, or a compromised sill pan usually point toward replacement, and we say so plainly rather than selling repeated repairs. We quote both paths so you can see the numbers side by side and decide with a written estimate in front of you.
If you’re not sure which side of that line your PGT unit is on, call (844) 320-7445. The estimate is free, and we’ll tell you what we find.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the glass for seal failure, check the glazing beads and gaskets, test the sill pan drainage, and operate every movable panel to see where the hardware is binding. On impact units we confirm seal breaches with a moisture meter rather than guessing from a visual.
- 2
Repair or install. For a repair, we set the new IGU or sash with fresh setting blocks and impact-rated gaskets so the assembly keeps its rating. For replacement, we install the new unit with flashing detailed for Allen’s storm pattern and seal it correctly at the frame.
- 3
Test. We operate the windows and doors through a full cycle, check that the drainage path at the sill is clear, and confirm the unit seats properly with no draft or rattle.
- 4
Warranty and paperwork. You get a written record of the parts and work, which is what you want if a warranty question ever comes up. We handle the assembly the way the manufacturer’s instructions call for, and we pull permits where the scope requires one through Allen’s permit office.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Allen
We work on PGT WinGuard aluminum impact windows and PGT WinGuard vinyl impact windows, both of which need careful handling at the glazing and sill because the impact rating depends on the whole assembly staying intact. We service and install PGT Eze Breeze sliding screen doors, including roller and track replacement. We also handle PGT Aluminum Series single-hung and sliding glass doors, which is where corrosion and sill-pan drainage issues tend to show up. On any of these, the options are repair or replacement, and we quote both. We don’t claim to stock PGT products; we source what the job needs when the lead time allows.
We Also Service These Brands
PGT isn’t the only name we know. We also work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler, Grohe, Toto, Moen, and Blanco fixtures, along with roofing systems from GAF, CertainTeed, and Owens Corning. That range means we can coordinate a window replacement with the roof work above it, or a kitchen or bath project with the windows and doors in the same room, under one contractor.
FAQs – PGT Construction Service in Allen
No. We are an independent PGT service provider, not authorized, sponsored, or endorsed by PGT. We install, repair, and service PGT products because we know them well, not because we carry a manufacturer badge. Call (844) 320-7445 for a free estimate.
Often yes. If the frame is sound and the glazing beads are intact, a foggy WinGuard window can usually be repaired with an OEM-matched insulated glass unit or a full sash, re-set with new setting blocks and impact-rated gaskets. When multiple seals or the frame itself have failed, replacement usually makes more sense, and we quote both so you can compare.
Worn rollers or a track that’s collected grit and debris are the usual causes. Flattened rollers let the panel drop slightly, which opens the seal at the sill and lets water in. Replacing the rollers and cleaning the track fixes most of these. Call (844) 320-7445 and we’ll take a look.
It depends on how much of the frame has failed. A single failed seal or a worn sill pan is worth repairing. Corrosion that’s pitted the frame at the weep holes and sill, especially when it’s letting water stain the interior, usually points to replacement. Our technicians have up to 13 years of experience with this call, and we quote both paths.
Yes. Impact-rated units need flashing detailed to shed wind-driven rain the way Allen’s spring storms deliver it, and the flashing has to integrate correctly with the frame and the wall assembly around it. Skipping or shortcutting the flashing is one of the most common causes of leaks after a replacement. Call (844) 320-7445 for an estimate on a proper replacement.
Not directly. A window seal failure lets water past the window assembly, but it won’t create a roof leak. What can happen is that water intruding at the window frame goes undetected and shows up as staining where the wall meets the roofline, which leads homeowners to blame the roof. We check both when we’re on site, and roof repair in Allen typically runs $400 – $1,800 when it does turn out to be the roof. Call (844) 320-7445 to sort out which one it is.
A single IGU replacement or roller swap is usually done in a day, while a full window replacement depends on the scope and the lead time for the OEM glass. We give you a realistic timeline with the written estimate, and we don’t promise what we can’t deliver. Call (844) 320-7445 to schedule your estimate.
Yes. We source OEM PGT replacement glass, rollers, balances, and weather seals whenever the lead time allows, because aftermarket parts tend to fail early in impact-rated assemblies. When an OEM part isn’t available in time, we tell you what the substitute is and what it means for the repair.
We service and install PGT WinGuard aluminum and vinyl impact windows, PGT Eze Breeze sliding screen doors, and PGT Aluminum Series single-hung and sliding glass doors. Repair and replacement are both available, and we quote both paths in writing.
Not if the work is done the way the manufacturer’s installation instructions call for. We handle assemblies to those standards so your coverage stays intact. We’re not a PGT dealer and can’t speak for the manufacturer’s warranty decisions, but we can give you a written record of the parts and work performed.
Typical estimated ranges in Allen are below. These are estimates, and the written line-item estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Call (844) 320-7445 for an exact quote. Estimates are free.
Book Your PGT Service in Allen, TX
Allen’s clay soil, hail, and long hot summers put real stress on PGT windows and doors, and the fix has to hold up. We diagnose the assembly, quote repair and replacement side by side, and install to the manufacturer’s standards so the work lasts. Call (844) 320-7445 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Whitman Contractors.