Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Allen Homeowners Choose Cover Construction
We provide independent Cover construction service in Allen, with licensed and insured crews who install and repair Cover frameless cabinetry, diagnose why a run of doors has started to rub, and finish a full kitchen to spec. What makes our Cover work different is the anchoring, leveling, and hardware discipline we bring to rail-hung boxes: we fasten rails to studs or added blocking, shim and scribe every run, and re-check hinges and cam-locks after install so drawers don’t drift during a North Texas humidity swing. To be clear about who we are: Whitman Contractors is an independent Cover service provider and is not affiliated with, authorized by, or sponsored by Cover.
Allen’s housing stock has a lot to do with why it matters here. The suburb built out almost entirely in a 25-year burst from the late 1980s through the 2000s, so the kitchens we’re asked to work on sit in Twin Creeks, Watters Crossing, and Bethany Ridge homes that are now 20 to 35 years old. Builder-grade cabinet runs have been replaced once or are finally showing their age, and the slab foundations underneath are moving with the clay. That combination is where Cover cabinet issues usually start. Call (844) 320-7445 for a free estimate.
Why Trust Whitman Contractors for Your Cover Construction?
Cover is a design-led cabinet and storage brand sold direct and through showrooms, and that sales model puts most of the install burden on independent contractors. The contractors who do it well know that a Cover box is frameless plywood, that it hangs from a rail rather than from face-frame screws, and that the leg levelers carry the load of a full run. Those aren’t details a general handyman usually accounts for. Our technicians have up to 13 years of experience and have hung, refaced, and repaired Cover Core and Cover Slab door styles, tall pantries, integrated appliance towers, and modular island and peninsula runs.
Because we’re independent, we quote, order, and install without any Cover authorization, and nothing pushes our advice toward a product the home doesn’t need. We repair and install Cover equipment with quality parts that fit it. Cover-specific hinges, leg levelers, drawer runners, and touch-up kits come from Cover or its documented replacement channel so fit and finish match. Where a generic part is dimensionally identical and load-rated for the box, we’ll use it and tell you why. Either way, our service approach protects the warranty rather than giving a manufacturer a reason to question it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in Allen
- Wall cabinets sagging out of level. Cover frameless boxes are heavy, and a rail fastened into drywall instead of studs or blocking starts to pull within a year or two. The cabinet face that was flat at install reads visibly out of line, and the doors reveal it first.
- Doors and drawers rubbing or drifting out of alignment. North Texas humidity swings move the plywood box and the wood door at different rates. If hinges and cam-locks aren’t re-checked after the install settles, a run that closed cleanly in March will rub by August. This is the single most common call we get on Cover kitchens.
- Edge-band peeling and surface damage near the dishwasher and sink. Painted and thermofoil-look door fronts take heat and steam from a dishwasher and standing moisture from a sink base. The edge band lifts first, then the face. Trim and a finish kit can stop it if it’s caught early.
- Filler, toe-kick, and scribe gaps opening up. Allen walls are rarely plumb after 25 to 35 years. When a run is set tight against an out-of-plumb wall instead of scribed and shimmed to it, the fillers crack and the toe-kick pulls away from the floor line.
- Water-swollen or delaminated carcasses. A slow leak under a sink or a dishwasher line failure can swell the plywood and separate the box. This is the one failure we don’t patch. A swollen or delaminated carcass gets replaced.
Cover Parts & Our Repair-vs-Replace Approach
We don’t stock, carry, or order OEM or genuine Cover parts, and we’re not a Cover dealer. What we do is source Cover-specific components through Cover or its documented replacement channel when fit and finish matter, and we tell you when a generic part will do the same job at lower cost. Hinges, drawer runners, leg levelers, and touch-up kits are where the wrong part shows, so those come from the right source. Hardware where the dimensions and load rating match the box is fair game.
Repair versus replace comes down to the carcass. When a Cover cabinet run is fundamentally sound, refacing and re-leveling beat replacement every time. When the plywood has swollen or delaminated, replacement is the only honest answer. Call (844) 320-7445 and we’ll walk a run with you and tell you which one you’re looking at before you commit to a number.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We check level and plumb on the whole run, not just the cabinet that looks off. We pull doors where needed, inspect the rail fastening, and find out whether the problem is anchoring, humidity drift, or a swollen box.
- 2
Planning the repair or install. For a new Cover run we locate studs and plan blocking first. For a repair we decide which boxes get re-anchored, which get re-scribed, and which need replacement. You get a written line-item quote before any work starts.
- 3
Repair and install. Rails go into studs or blocking. Boxes get shimmed and scribed to an out-of-plumb wall. Hinges, cam-locks, and drawer runners get set and re-aligned. Fillers and toe-kick go back on last so the run reads straight.
- 4
Test and warranty review. We open and close every door and drawer, check that drawers close flush across the full run, and confirm the finish is clean. Then we go over what our workmanship warranty covers and what stays with Cover’s own product warranty.
See the difference
Before
After
Before
After
Before
AfterCover Products We Service & Install in Allen
We service and install the kinds of Cover products Allen kitchens are built around: frameless plywood cabinet boxes with soft-close doors and drawers, Cover Core and Cover Slab door styles, tall pantry and integrated appliance tower units, and modular kitchen island and peninsula cabinet runs. That covers hanging new wall and base cabinets, refacing an existing run, and repairing the rail, leveler, and hardware problems a run develops over time. We also handle the surrounding kitchen scope: counters, backsplash, and island work, so a Cover cabinet job and the finish work around it stay on one schedule. Our technicians have up to 13 years of experience across that full kitchen scope.
We Also Service These Brands
We service KraftMaid and Cambria, which is why we can quote a Cover cabinet run alongside a Cambria countertop without handing you to a second contractor. We also work with Silestone and Kohler fixtures. Our bench of brands means you choose what fits the home and the budget, not what one supplier happens to carry. That’s how we run every kitchen in Allen.
FAQs – Cover Construction Service in Allen
An independent contractor can install Cover cabinets. Cover sells direct and through showrooms with an install-by-others model, so there’s no authorized-installer requirement forcing your hand. What matters is whether the installer understands frameless, rail-hung boxes and re-checks hardware after install. We’re independent, not Cover-authorized, and our work is backed by our own workmanship warranty.
Doors rub and drawers stop closing flush because the plywood boxes and wood fronts move at different rates as Allen humidity swings, and the hinges and cam-locks were never re-checked after the install settled. If the rail is also into drywall instead of studs, the whole run goes slightly out of level and the doors reveal it. Re-leveling, re-anchoring, and re-aligning the hardware fixes it. Call (844) 320-7445 for a look.
Refacing is worth it when the Cover carcasses are sound. Frameless plywood boxes that have been correctly hung hold their structure for decades, and refacing with new doors and hardware gets a fresh kitchen for a fraction of replacement cost. If the plywood has swollen or delaminated, replace it. We’ll tell you which one you’re looking at before any work starts.
Get a written line-item quote after someone inspects the actual wall and run. Typical estimated ranges for Allen are:
| Line item | Typical estimated range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
These are estimates, and the written estimate sets the final price. Call (844) 320-7445 for an exact quote; estimates are free.
An installer should check the wall for plumb and the framing for stud spacing before a single box goes up. That means locating studs or adding blocking for the rail, confirming the floor is level enough for the leg levelers, and planning scribe and filler allowances for an out-of-plumb wall. In 20 to 35 year old Allen homes, the wall is almost never plumb. An installer who skips this step is the reason doors rub later.
We cover Cover frameless cabinet boxes, Cover Core and Cover Slab door styles, tall pantry and integrated appliance tower units, and modular island and peninsula runs. That includes installing them new, refacing them, and repairing rail, leveler, and hardware issues on existing runs. If you’re unsure whether your specific setup is in scope, call (844) 320-7445 and we’ll tell you.
Book Your Cover Service in Allen, TX
Whether you’re hanging a new Cover run, refacing a worn kitchen, or chasing a set of doors that won’t stay aligned, we’ll give you a written line-item estimate and a straight answer about repair versus replace. Call (844) 320-7445. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, licensed and insured.
Written by the team at Whitman Contractors.